2. Automobile Radiator Making Machine We have a complete range of machinery for producing automobile radiators:
      - Aluminum microchannel flat tube cutting machine
      - Header pipe punching machine
      - Automatic core builder
      - Automatic tank clinching machine
      - Aluminum brazing furnace
    2. Air Conditioner Radiator Core Making Machines

      We own and operate a variety of machines for processing air conditioner radiator cores:
      - Aluminum fin punching press
      - Radiator core tube expanding machine
      - Copper pipe U bending machine
      - Condenser core U L G bending machine

    2. Transformer Radiator Fin Plate Forming and Welding Line Our transformer radiator fin plate forming and welding line take advantage of the technology from Germany GEORG and Canadian MTM. It is designed mainly to manufacture fin plate of different widths (520 or 535mm, 480mm, 320 or 310mm) with high efficiency.
    2. Radiator Fin Forming Machine By using different kind of dies, this fin forming machine can produce different kinds of fins for radiators, condensers and evaporators used in refrigerators, automobiles. The material can be aluminum, copper and stainless steel.
    2. Tridimensional Core Transformer Making Machine Our tridimensional core is especially designed for producing tridimensional core transformer which exhibits better performance, more reasonable structure, as well as less production cost. The tridimensional core is a new structure wound GRGO core with three columns of round cross section.
    2. Spiral Filter Core Forming Machine Any length can be cut according to customer's requirement.
      By adjusting clutch, the spiral forming machine can be suitable for materials of different thick.
      Adopting PLC control system, this forming machine offers high efficiency, stable quality, less procedures and materials, thus reducing the production cost.
    2. Transformer Core Winding Machine

      We have various core winding machines:
      - Heavy-duty transformer core winding machine
      - Full automatic toroidal core winding machine
      - Semi-automatic toroidal core winding machine
      - Miniature magnetic core winding machine
    2. Amorphous Transformer Machine This amorphous cutting machine is specially designed for automatic cutting and stacking amorphous strips for cores.
      This line adopts PLC control, servo drive, touch screen operation and high precision mechanical transmitting mechanisms, thereby ensuring high automation, high productivity and high reliability.
    2. Vacuum Annealing Furnace This annealing furnace is specially designed for releasing inner stress inside wound CRGO cores and decreasing their iron loss.
      It is inner-heating, vacuum, nitrogen-cooling, front load type with trolley.
    2. H-beam Production Line This line consists of CNC controlled straight/profile flame cutting machine, H-beam auto assembling machine, gantry type H-beam welding machine, H-beam steel rectifying machine and shot-blasting machine.
    2. Automatic Chain Making Machine Auto feeding & straightening, auto forming
      Numerical control, quantity of links can be pre-set
      Easy operation, convenient mould change
    2. APG Epoxy Resin Casting Machine Our WHAG-888 APG Epoxy Resin Casting Machine adopts the automatic pressure gelation processing technology. It is used to cast high voltage electrical components with epoxy resin. The APG technology can reduce the casting duration from dozen hours (by conventional vacuum casting method) to dozen minutes.
    2. Transformer Core Cutting Machines We have various transformer core cutting machines available:
      Fully automatic CNC step-lap mitred core cut to length line (GEORG like)
      Compact swing shear step-lap mitred core cut to length line
      Distributed gap core cutting machine (UNICORE like)
      High speed electrical silicon steel rectangular / straight cutting machine
    2. CNC Coil Winder

      We have a variety of different CNC coil winding machines available for different applications:
      - Fully automatic air coil winding machine
      - Fully automatic speaker voice coil winding machine
      - Fully automatic wireless charging coil winding machine
      - Fully automatic miniature toroidal coil winding machine

    2. Wedge Wire Filter Tube Welding Machine This Wedge Wire Filter Tube Welding Machine is specially-designed for welding filter tubes for any filtering purposes in chemicals, mining, environmental protection, as well as many other industries.
    2. Tube Cutting Machine The tube cutting machine is a NC cut-to-length machine for straightening coil copper tubes and cutting it into the length required, automatically. It adopts special cutting technology, resulting in chipless cutting and small deformation of the cutting section.
    2. Street Pole/Post Production Line It is the production line that is ideal for producing lamp pole / post, signal pole /post, electric pipe tower and telecom power, etc.
      Simple decoiling, leveling and slitting line
      Beveled Cutting Line
    2. 3D Panel Welding Machine This 3D panel welding machine is used to produce structural reinforced concrete panel, also called "3-D" panel. This three-dimensional panel usually adopts 50mm thick uninflammable polystyrene panel as core. One side or both sides of the panel are covered with steel wire welded mesh.
    2. Polyurethane Foam Injecting Machine This injecting machine is mainly used to inject rigid or soft polyurethane foam continuously for various thermal insulation purposes.
      Being controlled by PLC, this machine offers high accuracy, simple operation and convenient maintenance. The alarming relay will give alarms when pre-setting first injection is finished.
    2. Transformer Turns Ratio Meter High turns ratio range: 1-10,000
      Built-in large-size thermal printer.
      Phase angle and winding polarity measuring.
      Name-plate turns ratio calculation.
    2. Transformer Coil Winding Machine

      We have a variety of coil winding machines for distribution transformers and power transformers available:
      LV coil winding machine
      HV coil winding machine with automatic wire guiding device
      Fully automatic coil winding machine with auto insulation winding
      Fully automatic multiple coil winding machine
      Vertical coil winding machine for power transformer

    2. Steel Coil Wrapping Machine This wrapping machine can be used to packing various materials, such as laminated film or dampproof paper tape etc. After being wrapped, the products are good-looking, waterproof, anti-rust, which are easy to transport and store.
    2. Transformer Winding Resistance Meter This ZRS series transformer winding resistance meter is the newest instrument for measuring DC resistance of big power transformers windings. It's able to measure three windings simultaneously and it has auto-discharge circuit for operator safety, for OLTC transformer, discharge no needed. Test duration is only one third than conventional single-phase DC meter.
    2. Die Casting Machine Being made of hot-work iron or steel, nozzle, gooseneck and melting pot are especially.
       Heated by electric heater, nozzle and goose neck are safe and durable. This keeps temperature steady and avoids jamming of nozzle, resulting in no defective products.
      Auto central lubricating system, directly setting up times of toggle turning lubrication.
    2. Fan Guard Making Machine Our fan guard making machine is mainly used for producing radial type electric fan guards (covers), both front and back. The electric fan guard production line is composed of radial wire auto welding machine, mid ring welding machine, outer ring welding machine, ring forming machine, butt welding machine, hydraulic press, wire bending machine for handles, handle welding machine, edge trimming machine, and so on.
    2. Serpentine Tube Bending Machine We provide two different serpentine tube bending machines: one for bending microchannel flat aluminum tubes used in automobile evaporators, and another for bending round metal tubes for heat exchangers.
    2. Steel Grating Welding Machine This steel grating welding machine is composed of gantry type welding machine, double-layer flat steel feeding device, cross bar auto falling device, steel grating hauling device, hydraulic & pneumatic system, cooling system, electric control system, etc.
    2. Rolling Shutter Slats Roll Forming Machine This roll forming machine can produce rolling shutter slats with polyurethane foam online injected. Its PLC control system such as PLC, touch screen, inverter and encoder are imported from Japan.
      - Steps of rollers: 32 stations
      - Length of main machine: 24 meter
    2. Hook and Eye Machine Our hook and eye machine is produced using advanced technology from Japan, with high speed and good working efficiency.
      It is equipped with auto feeding and straightening device, and can automatically stop when there is fault.
    2. Concrete Pipe Cage Welding Machine DC power can assure the welding speed, prolong the life of welding electrodes and save at least 30% electric consumption
      PLC, inverter, touch screen are imported
      Densely-wind length on both ends of the cage and the hoop reinforcement interval can be pre-set on the touch screen.
    2. Spiral Duct Forming Machine Special mould for various diameters, very easy to change and adjust, crane or too much manpower are not needed
      Large diameter range
      High speed synchro flying cutting system
      PLC touch screen control, convenient operation
    2. Steel Tube (Cylinder) Necking-in & Closing Machine Our steel tube (cylinder) necking-in & closing machine uses an automatic medium frequency heating method for hot spinning. It can be used for both necking in and closing steel tubes and cylinders. It can close flat ends, spherical ends and elliptical ends, with a freely adjusted necked in mouth diameter.
    2. Ring Bending Machine Full hydraulic drive, stepless speed changing
      Imported hydraulic components: such as hydraulic engine from Denmark; motor, oil pump and electromagnetic valves from Taiwan; encoder from Japan.
      Numerical display plus encoder for setting length and cutting automatically
    2. Mechanical Press The JL21 stroke adjustable press comes with welded body for high intensity.
      The mechanical press is installed with dry type pneumatic friction clutch.
      Users can adjust the sliding block stroke through the air cylinder.
      In addition to the eight-face slide guide, this range of product is equipped with overload protection device.